4 ATVPARTS

Polaris ATV Sportsman Ranger Etc. (Struts) Front Ball Joint Puller Removal Tool

Polaris ATV Sportsman Ranger Etc. (Struts) Front Ball Joint Puller Removal Tool
SKU QT.00828 BJRTK-002 Category Tag

Removal Tool can be used on almost any Polaris ATV or UTV with the strut style front suspension from about 1985 to current

Compatible with – some models include Polaris Sportsman, Magnum, Xplorer, Trail Boss, Trail Blazer, Xpedition, Scrambler, Ranger, Worker etc

Heavy Duty Design – Sturdy steel and Zinc plated for rust and corrosion resistant. Suitable for personal and professional use

Two pieces steel puller simply goes over the ball joint, install the nut, and turn out the inner puller to remove the ball joint. A 6 point 1″ socket is required to use this tool and NOT included

Uses the top few threads of the ball joint so even in your threads are damaged you can still make our puller work due to the dual puller design
The Instructions
Step 1: Pull the Rubber Sleeve.
Step 2: Put the Removal Tool on the Ball Joint.
Step 3: Fixed with the Nut.
Step 4: Enable the Wrench for Disassembly.
Step 5: The Ball Joint will be Removed Easily.
Notes:
Pulling the ball joints from the aluminum strut housing on most Polaris ATV’s can be a real challenge.
We developed this unique tool to make the job much easier.
This two pieces steel puller simply goes over the ball joint, install the nut, and turn out the inner puller to remove the ball joint.
A 6 point 1″ socket is required.
The Features
Zinc plated for corrosion resistance. The heavy duty design is suited for either home or professional shop use.
Unlike other tools on the market that use all of the old ball joints threads, this tool only uses the top few threads of the ball joint.
If your threads are damaged, those other pullers will not work! But our removal tool is a double puller design, so even if your threads are damaged, you can usually still get the puller to work.
Does the ball joint spin freely or slop up and down in its housing No problem, this puller will easily remove it!
Fitment:
This puller can be used on almost any Polaris ATV or UTV with the strut style front suspension from about 1985 to current.
Interchange Part Number: 100-4057
Package Included:
1x Front Ball Joint Puller Removal Tool (As the Pictures)

Contact Us