Fits between the two outside rollers on an ATV or UTV winch fairlead
Made of rubber, water repellent & abrasion resistant
Used to avoid the cable to pull the hook to the bottom and stop the hook from getting jammed into the roller
All steel ropes, wires and synthetic cables up to 15/32″ in diameter (12mm)
Package includes: 1 Orange Winch Stopper with 4 machine screws and an Allen wrench for installation Product Description
Note:
Freespool winch and pull out approx. 2 feet of cable.
Pull Hairpin and release clevis pin from winch hook.
Remove the four bolts fastening the two halves of the Split Cable Hook Stopper together.
Place the cable or rope between the two halves. Insert the four bolts and tighten.
Re-attach hook to cable end.
To stow hook, engage clutch and retract cable onto winch spool until hook is snug against the hook stopper and fairlead.
Position hook stopper at approx. 3/4 of the total line distance towards hook while using you winch.
Package Includes: 
1 Orange Winch Stopper
4x screws
1 x inner hexagon wrench